Philips MBD3000/12 User Manual download pdf (Page 18)

19

One-touch play

1 Press (standby) to turn on this product.

The TV (if the TV supports one-touch play) »

automatically turns on and switches to

the correct video-in channel.

If a disc is loaded in this product, disc »

play automatically starts.

One-touch standby

1 Press and hold (standby) for more than

3 seconds.

All the connected devices (if the »

device supports one-touch standby)

automatically switch to standby.

Map the devices to the audio inputs

Note

Before you start, ensure that the audio output •

of the HDMI TV and other HDMI devices have

been connected to the audio input jacks on

this product.

1 Press , select [Setup], then press OK.

2 Select [EasyLink], then press .

• [One Touch Play] and [One Touch

Standby] functions are turned on by

default.

3 Select [System Audio Control] > [On].

4 Read the on-screen instructions and

press OK to select [Continue].

The product scans and displays the »

valid devices.

View Network Settings

Network Installation

View Wireless Settings

Video

Advanced

Audio

Network

Preference

EasyLink

Install the network connection

For the ﬁrst time you connect the network,

install the network connection.

1 Set up a wired or wireless network.

2 Press to display the home menu.

3 Select [Setup] and press OK.

4 Select [Network], and press .

5 Select [Network Installation], and press OK.

6 Follow the on-screen instructions to

complete the network installation.

After the network installation »

completes, you can access the services:

BD-Live and software updates.

Tip

You can check the status of the wired or wireless •

connection of this product (see “Adjust settings”

> “Network Setup” >[View Network Settings]

or [View Wireless Settings]).

Use Philips EasyLink

This player supports Philips EasyLink which uses

the HDMI CEC (Consumer Electronics Control)

protocol. You can use one single remote control

to control EasyLink-compliant devices that are

connected through HDMI connectors.

Note

To enable the EasyLink feature, you must turn •

on the HDMI CEC operations on the TV and

on other devices connected to TV. Refer to

the TVs/devices manual for details.

View Network Settings

Network Installation

View Wireless Settings

Video

Advanced

Audio

Network

Preference

EasyLink

English

EN

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

Comments to this Manuals

No comments