Philips HTR5205 User Manual download pdf (Page 21)

English

21

Tuner Operations

Before you start...

Please make sure the FM and AM/MW

antennas are connected.

Tuning to radio stations

A Press SOURCE repeatedly until ‘FM’ or

‘AM/MW’ appears on the display panel.

(or press RADIO on the remote control).

B Press W or X on the remote control to

start tuning.

 The display panel will show ‘SEARCH’

change until a radio station with suf cient

signal strength is found.

C Repeat step B if necessary until you  nd

the desired radio station

D To  ne-tune the reception of a weak

station, press S or T brie y and

repeatedly until an optimal reception is

found.

Changing tuning grid

(only applicable for certain regions)

In some countries, the frequency step

between adjacent channels in the

(AM/MW)/ FM band is 9 kHz/ 50 kHz

(10 kHz/100 kHz in some areas).

Note:

Changing the tuning grid erases all

previously stored preset radio stations.

A Press SOURCE repeatedly until ‘FM’ or

‘AM/MW’ appears

B Press and hold u until ‘GRID 9’ or

‘GRID 10’ appears.

Presetting radio stations

You can store up to 40 preset radio

stations in the memory. There are three

different ways to program the radio

stations:

– Using auto install (for  rst time setup

only)

– Using automatic preset

– Using manual preset

Helpful Hint:

– If no stereo signal is detected or less than

5 ( ve) stations are detected during radio

installation, ‘PLEASE CHECK ANT’ appears.

Using auto install

When you access the ‘RADIO’ mode for

the  rst time, you will be prompted to

install the radio stations. With this

feature, you can install all the available

radio station automatically with one

touch of button.

A Press RADIO on the remote control

 ‘AUTO INSTALL ... PRESS PLAY’

appears.

B Press u until ‘START... SEARCH’

appears on the display panel.

 The system will start searching from

the FM band followed by the AM/MW

band.

 All available radio stations with strong

signal will be stored.

 Once complete, the  rst tuned radio

station will be played back.



To stop the tuner installation, press

STOPÇ on the remote control.

1_htr5205-98_EN.indd 211_htr5205-98_EN.indd 21 2007-03-30 11:53:53 AM2007-03-30 11:53:53 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27

Comments to this Manuals

No comments