Philips FW-V520 User Manual download pdf (Page 29)

English

3139 115 21093

● Before setting the timer, make sure the music

source has been prepared.

VCD – Load the disc(s). To start from a specific

track, make a programme (refer to “CD/VCD/

MP3-CD Operation - Programming the disc

tracks”).

TUNER – tune to the desired radio station.

TAPE – load the prerecorded tape into tape

deck 2.

3 Press à or á on the system repeatedly to set

the hour for the timer to start.

4 Press í or ë on the system repeatedly to set

the minute for the timer to start.

5 Press CLOCK•TIMER to store the start time.

➜ "TIMER ON" will be displayed and followed

by the set timer "XX:XX" and then the selected

source.

➜ TIMER will remain on the display.

● At the preset time, the selected source will play.

To exit without storing the setting

● Press Çon the system.

Clock/Timer

To deactivate the TIMER

1 Press and hold CLOCK•TIMER for more than

two seconds.

2 Press Çon the system to cancel the timer.

➜ The display will show "CANCEL" and TIMER

will disappear from the display.

To activate the TIMER (for the same preset

time and source)

1 Press and hold CLOCK•TIMER for more than

two seconds.

2 Press CLOCK•TIMER again to store the start

time.

➜ The last set timer information will be shown

for a few seconds and TIMER will appear on

the display.

Notes:

– If the source selected is VCD, playback will begin

with the first track of the last selected disc or other

trays if disc is empty. If all the disc trays are empty,

TUNER will be selected instead.

– During timer setting, if no button is pressed

within 90 seconds, the system will exit timer setting

mode automatically.

Listening to External Sources

1 Connect the audio out terminals of the external

equipment (TV, VCR, Laser Disc player, DVD

player or CD Recorder) to the AUX/CDR IN

terminals of your system.

ECO POWER

CD 1•2•3

BAND

CDR/ DVD

TAPE 1•2

PROG

DUBBING REC

CLOCK•

TIMER

AUTO

REPLAY

STANDBY-ON

INTERACTIVE VU ME

DEMO

STOP/

CLEAR

PLAY•

PAUSE

•

TUNER

TAP E AUX

DISPLAY

SOURCE

VCD

PAL/

NTSC

MIC

LEVE

MP3

•

MAX BASS DYNAMIC AMPLIFI

CONTROL (DAC)

MAX

SOUND

External Sources

2 Press AUX (CDR/DVD) repeatedly to select

CDR/DVD mode or normal AUX mode.

➜ "CDR/DVD" or "AUX" will be displayed.

● If the sound from the external source is

distorted, select CDR/DVD mode for listening.

Notes:

– You are advised not to listen to and record from

the same source simultaneously.

– All the navigation sound control features (DSC or

VAC for example) are available for selection.

– Refer to the operating instructions for the

connected equipment for details.

For Recording, please refer to “Tape

Operation/Recording”.

pg 001-032/V520/21-Eng 12/11/01, 5:06 PM29

1 2 ... 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Philips FW-V520 User Manual Page 29

Comments to this Manuals

Related products and manuals for Acoustics Philips FW-V520