Philips Lightolier MFB User Manual download pdf

LIGHTOLIIÈR*

Lighting Systems

MMB & MFB

Page 1 of 2 Multi-Lyte Direct/Indirect 2-Light T8 or T5

Ordering Information

Type Style No.of

Lamps

Length Ballast

Type

Lamp

Type

Voltage

Type

M B

= Multi-Lyte

system

= LightlngFIxture

for individual

mounting

= Lighting module

for channel

attachment

= 2-foot

nominal

= 4-foot

nominal

= Electronic

= Dimming(120v

T8 0nly)

= 2-foot14W T5

= 4-foot28WT5

= 4-foot54WT8

= 2-foot17WT8

= 4-foot32WT8

= 120v

= 277v

Specifications

1. Housing: 20 gauge die-formed steel. Finish is white baked enamel.

2. End Plate: Die-formed 20 gauge steel spot-welded to the housing. Finished to

match housing.

3. Parabolic Louver: Low iridescent semi-specular anodized aluminum, 37°

shielding lengthwise, blades are 1-1/4" (3.18cm) high and 2" (5.08cm) O.C.

Concealed spring clips retain louver in housing.

4. Lamps: 17or32 watt T-8 fluorescent or 14,28 or 54 watt T-5 linearfluorescent.

All lamps provided by others.

5. Ballast: T8: Pre-Heat Rapid Start with a ballast factor .87. All ballasts have

a Total Harmonic Distortion (THD) <10% and are available in120 or277 volt.

Dimming is available with a dimming range of 15% to 100% in 120v only. T5:

All ballasts have "end of life" circuit protection, a Total Harmonic Distortion

(THD) <10%, a ballast factor of .87 and are available in 120 or 277 volt. Factory

installed ballast disconnect allows the ballast to be disconnected from and

reconnected to incoming power under load without turning the entire circuit off.

6. Suspension: (not shown) The Multi-Lyte Channel and the Fixture are suspended

from the ceilingby stem or aircraft cable. The stem set is finished to match the

housing and contains a 1/2" (1.27cm) diameter steel stem which can be cut

to length at the job and a 4-1/2" (11.43cm) diameter canopy. Attached to the

stem at the ceiling end is a self-aligning swivel that provides adjustment up to

38°. The cable set contains a 1/16" (0.16cm) diameter stainless steel aircraft

cable and a 1-1/2" (3.81cm) diameter or4-1/2" (11.43cm) diametercanopy. The

cable is adjustable from 6" (15.24cm) to 36" (91.44cm) with a Grip-Lock cable

adjustment. Fixtures are mounted directlyto the ceiling with independent stems

or aircraft cables and cord.

7. Module Mounting: Modules are mounted to the Multi-Lyte Channel by means

of slide clips. They are energized by insulation-displacement couplings to the

Channel's through-wiring system.

8. Fixture Mounting: (not shown) The individual Fixture mounting points are

located 30" (76.20cm) and 60" (152.40cm) centers. Referto the backfor more

information.

Performance

Efficiency: 83.6%

Distribution: 58% Indirect 42% Direct

Labels

UL, cULandIBEW.

Warranty

Multi-Lyte Complete system is covered by Lightolierthree-year limited warranty.

The electronic ballast is covered by ballast manufacturer's limited warranty.

Job Information

1 Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

631 Airport Road, Eall River, MA 02720 • (508) 679-8131 • Eax (508) 674-4710

We reserve the right to change details of design, materials and finish.

Lightolier is a Philips group brand

PHILIPS

1 2

MMB & MFB 1

Summary of Contents

Page 1 - MMB & MFB

LIGHTOLIIÈR*Lighting Systems MMB & MFBPage 1 of 2 Multi-Lyte Direct/Indirect 2-Light T8 or T5Ordering InformationType Style No.ofLampsLength Balla

Page 2

LIGHTOLIIËR*Lighting Systems MMB & MFBPage 2of 2Multi-Lyte Direct/Indirect 2-Light T8 or T5PerformanceReport Number: LRL797-3C Lamps: 2-F32T8/TL80

Related models: Lightolier MMB

Comments to this Manuals

No comments

Philips Lightolier MFB User Manual

Browse online or download User Manual for Accessories for electrical Philips Lightolier MFB. Philips Lightolier MFB User Manual

Summary of Contents

Related models: Lightolier MMB

Comments to this Manuals

Related products and manuals for Accessories for electrical Philips Lightolier MFB