Wall Mount Split UnitsAMW/AMC 25, 30, 45 &60by AITONS'AMW / AMC SERIESInstallation, OperationAnd Maintenance ManualPlease read this manual be
AIR PURGINGThis procedure is used to remove air from inside the piping connecting the indoor and outdoor units, as well as the air inside the indoor u
DRAIN PIPE CONNECTIONThe fan coil is equipped with a drain hose. It is tied together with the refrigerant piping. During installation, it is importa
ELECTRICAL WIRINGLOCATION OF TERMINAL BLOCK:The terminal block on the indoor unit is located next to the PCB. Cable access is through the back of the
OPERATING INSTRUCTIONSOPERATING TIPS:Observe the following points for economical and safe operation:! Keep the room temperature at a comfortable leve
AUXILIARY CONTROLFigure below illustrates the auxiliary control on the fan coil. This can be used to operate / control the air conditioner when the r
REMOTE CONTROL OPERATIONCONTROLS AND INDICATORSFigure below illustrates the various controls and indicators of the LCD wireless remote control.MODEL:
MODEL: AMW 45, 60
OPERATING INSTRUCTIONSBefore operating the unit for the first time, it is necessary to install the batteries in the remote controller.! Batteries are
MODEL: AMW 45, 60! Start air conditioner. Point the remote controller at the fan coil and press "ON/OFF" button.! Select operation mode. P
CARE AND MAINTENANCE! The air conditioner requires proper care and maintenance for efficient operation. A periodic inspection and cleaning may be ava
INSTALLATION INSTRUCTIONSTOOLS AND SUPPLIESThe following tools are needed for installation.1. Level2. Hole Saw3. Core bits4. Hammer5. D
TROUBLE SHOOTINGThe following are normal and should not be treated as defects.! Hissing sound, like flow of water from the unit. This is the sound of
AMW/AMC 25
AMW/AMC 30
AMW/AMC 45 & 60
SERVICE NOTESAITONS' EQUIPMENT INC.Guelph, Ontariowww.aitons.come-mail: [email protected] in Canada 03/03
SELECTION OF LOCATIONSelect a convenient location where:INDOOR UNIT! The cool air can reach every corner of the area to be cooled.! The unit is away f
RECOMMENDED HEIGHT AND LENGTHIf the refrigerant piping is longer than the recommended length, or if the height difference between the indoor and outdo
MOUNTING INSTALLATION PLATE:The fan coil can be installed using any of the four methods described below. Determine which is the most suitable method.
INSTALLATION OF FAN COIL:The extended liquid and suction pipes and drain hose are hidden inside a slot at the back of the fan coil. This allows the h
REFRIGERATION PIPING & DRAINAGEPREPARATION OF PIPINGFan coil and side discharge condensing units are equipped with flare connections. Improper fla
PIPING INSULATIONLiquid and suction lines must be insulated separately. In a cooling only type air conditioner, both pipes become cold during operati
(c) PRECAUTIONS WHEN CONNECTING PIPES:Connections will go more smoothly if the large pipe is connected first, followed by the small pipe. Hold th
Comments to this Manuals